0

Ihr Einkaufswagen ist im Moment leer.

Weiter einkaufen

Gesamt: €0,00
Einkaufswagen einsehen
Toggle menu
0
  • Zuhause
  • Holybro Kakute H743 Wing Flight Controller und GPS
Holybro Kakute H743 Wing Flight Controller und GPS
Klicken zum Vergrößern
Laden Sie das Bild in den Galerie-Viewer, Holybro Kakute H743 Wing Flight Controller und GPS

Holybro Kakute H743 Wing Flight Controller und GPS

FC-HKH743GPS
Feature-rich flight controller for fixed-wing aircraft including a GPS module
€122,95

Beschreibung

Der Holybro Kakute H743 Wing ist ein voll ausgestatteter Flugcontroller mit einem Layout speziell für Starrflügel- und VTOL-Anwendungen. Es verfügt über den STM32 H743-Prozessor mit 480 MHz und CAN-Bus-Unterstützung sowie Dual-Kamera-Unterstützung und -Schalter, EIN/AUS-Pit-Schalter, 5 V, 6 V/8 V, 9 V/12 BEC und Plug-and-Play-GPS, CAN, I2C-Ports.

Diese Version wird mit vorgelöteten Stiftleisten und dem Micro M10 GPS-Modul geliefert.

Mehr anzeigen
Weniger anzeigen
MCU STM32H743 32-bit processor running at 480 MHz
Gyro ICM-42688P (SPI3)
Barometer BMP280 (I2C4)
Dimensions 45x30x13.5mm (25x25mm mounting holes)
Weight 28g

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
J
James Malone
OK Flight Controller

It is nice that the GPS/Compass has a dedicated cable that plugs into the FC. I also liked the fact that it came with all the pins soldered.

What I did not care for was the way the pins were setup. Instead of having G,V.TX,RX. in a straight line the power wire had to be done separately for the RX and Digital VTX. I had a few problems with mine and had to replace it with another one. I have since switched over to a Matek H743 which has a more sensible pin ordering for the different components ie GPS, VTX, and RX.

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
J
James Malone
OK Flight Controller

It is nice that the GPS/Compass has a dedicated cable that plugs into the FC. I also liked the fact that it came with all the pins soldered.

What I did not care for was the way the pins were setup. Instead of having G,V.TX,RX. in a straight line the power wire had to be done separately for the RX and Digital VTX. I had a few problems with mine and had to replace it with another one. I have since switched over to a Matek H743 which has a more sensible pin ordering for the different components ie GPS, VTX, and RX.

Einkaufswagen

×