Ausverkauft
iFlight SucceX-D Mini F7 TwinG Flugcontroller
iFlight SucceX-D Mini F7 TwinG Flugcontroller
iFlight SucceX-D Mini F7 TwinG Flugcontroller
Klicken zum Vergrößern

iFlight SucceX-D Mini F7 TwinG Flugcontroller

AC-IF7DJIM
Innovative twin gyro system is ready for your DJI HD system
€68,95

Der SucceX-D Mini F7 ist so konzipiert, dass er nahtlos mit dem neuen HD-FPV-System von DJI zusammenarbeitet. Um die Sache noch einfacher zu machen, kann die DJI Air-Einheit einfach mit dem mitgelieferten Kabelbaum an den FC angeschlossen werden. Darüber hinaus haben wir den beliebten und zuverlässigen USB Typ-C anstelle von Micro-USB hinzugefügt und damit den gleichen Standard wie Ihr DJI-Modul.

Aber die wahre Magie dieses Flugreglers liegt in seiner Konfiguration mit zwei Kreiseln . Der TwinG verwendet zwei identische Kreisel, die nebeneinander ausgerichtet sind und jeweils um 90 Grad gegeneinander versetzt sind. Betaflight verwendet Gyro-Fusion, um die Informationen beider Gyros zu mischen und zu mitteln, um ein viel saubereres Signal an den PID-Schleifenregler zu senden! Das bedeutet weniger Lärm und weniger Schwingungen im gesamten Drosselbereich, ohne dass es zu Verzögerungen kommt! In den meisten Fällen können die Betaflight-Softwarefilter auch verringert werden, was zu einer deutlichen Verringerung der Verzögerung führt.

Mit viel Rechenleistung und UARTS ist dies auch der perfekte Flugcontroller für GPS-Aufbauten mit großer Reichweite. Und die TwinG-Konfiguration macht es zum perfekten FC für Aufbauten wie Makro-Quads, Kinofilm-Rigs und X-Klasse-Rennwagen, deren Abstimmung etwas schwieriger ist.
Mehr anzeigen
Weniger anzeigen
Dimensions 29x29mm (20x20mm mounting)
Input Voltage (Max) 2-6S LiPo recommended, 8S maximum
Weight 6.1g
3-Axis Gyroscope and Accelerometer 2x ICM20689
MCU 216MHz STM32F722

Customer Reviews

Based on 4 reviews
50%
(2)
25%
(1)
25%
(1)
0%
(0)
0%
(0)
M
Micah Edmunds
Easy to install

Perfect fit, tune, and set up is on point in BF. I just wish they included the mounting screws.

S
Seth Heerschap
Works as advertised.

My iFlight Nazgul Evoque FC shorted out and I had to get a replacement. This one works fine. The only thing that would be nice is a higher resolution wiring map, but I able to manage.

G
Gregory Turner
This is a great flight controller.

I use this flight controller in my 3”gecko. Flies awesome, easy to solder with big pads.

B
Brandon
Iflight Twing G f7 Mini 20x20

I finally got the flight controller as a replacment for a FC that had a bad gyro causing noise on pitch. I installed this flight controller. I set it up in betaflight, i set the battery current scale to 100 like the instructions say. Even though it came out of a ESC with a onboard Shunt and was accurate at 170. During the first flight, I noticed the amps were not correct. 35amps at idle. While flying it only got up to 50 or 60amps. I have sense tried everything to calibrate it. No matter what number you put in, you get 35amps at idle. Besides not having a current reading, thr flight controllet is really nice, unfortunately, I cannot tell what I am pull8ng for amps. Or total mah. I have built over 10 quads, and have never had this happen, where a prior flight controller works fine if plugged back in and monitor (current reading) unfortunately this one is not working. Other then that, its a great flight controller. Dual gyro fusion, both work flawlessly. Very pleased besides the fact. -Brandon

Customer Reviews

Based on 4 reviews
50%
(2)
25%
(1)
25%
(1)
0%
(0)
0%
(0)
M
Micah Edmunds
Easy to install

Perfect fit, tune, and set up is on point in BF. I just wish they included the mounting screws.

S
Seth Heerschap
Works as advertised.

My iFlight Nazgul Evoque FC shorted out and I had to get a replacement. This one works fine. The only thing that would be nice is a higher resolution wiring map, but I able to manage.

G
Gregory Turner
This is a great flight controller.

I use this flight controller in my 3”gecko. Flies awesome, easy to solder with big pads.

B
Brandon
Iflight Twing G f7 Mini 20x20

I finally got the flight controller as a replacment for a FC that had a bad gyro causing noise on pitch. I installed this flight controller. I set it up in betaflight, i set the battery current scale to 100 like the instructions say. Even though it came out of a ESC with a onboard Shunt and was accurate at 170. During the first flight, I noticed the amps were not correct. 35amps at idle. While flying it only got up to 50 or 60amps. I have sense tried everything to calibrate it. No matter what number you put in, you get 35amps at idle. Besides not having a current reading, thr flight controllet is really nice, unfortunately, I cannot tell what I am pull8ng for amps. Or total mah. I have built over 10 quads, and have never had this happen, where a prior flight controller works fine if plugged back in and monitor (current reading) unfortunately this one is not working. Other then that, its a great flight controller. Dual gyro fusion, both work flawlessly. Very pleased besides the fact. -Brandon

Einkaufswagen

×