IOTA DLS-90 Konverter und Ladegerät
IOTA DLS-90 Konverter und Ladegerät
IOTA DLS-90 Konverter und Ladegerät
IOTA DLS-90 Konverter und Ladegerät
IOTA DLS-90 Konverter und Ladegerät
Klicken zum Vergrößern

IOTA DLS-90 Konverter und Ladegerät

PS-DLS90
040232430107
High quality power supply provides 1200 watts, 90 amps, 13.6 volts
€250,95

Hochwertige Technik ist das Markenzeichen von IOTA, und die DLS-Serie bildet da keine Ausnahme; Ihr außergewöhnlich sauberer Gleichstromausgang schützt Ihre Ausrüstung und sorgt dafür, dass Sie bei jedem Einschalten perfekte Ergebnisse erzielen.

Der DLS-90 liefert 1200 Watt bei 90 Ampere und ist damit die ideale Wahl, wenn Sie mehrere Ladegeräte mit unserem Netzteil-Splitter betreiben möchten.
Mehr anzeigen
Weniger anzeigen
AC Cable Integrated
Input Voltage 108-132V AC
Dimensions 330x165x86mm
Charge Power (Max) 1200W
Voltage (Output) 13.6/14.2V DC (switchable)
Warranty 2 years
Weight 3600g
Charge Current Range 90A

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous Anonymous
Great

Only maintainer I've ever had that would not allow my tech2 to blank out when I hit the starter big plus

B
BikeGuy
Great little power supply

I got the Iota 90 amp charger mainly to power my iCharger 406Duo. If needed I can also charge lead acid batteries I use for Electrathon radioing. But the main purpose is I have around 40 4s LiPO packs I use between the four FPV mini quads I have. Being able to charge near or at 40 amps per channel with 20 batteries on each of the two channels is super helpful. The Iota can dish out whatever the iCharger needs to charge packs up like a champ.
Thanks for the help and keep up the awesome work!

G
G
DLS-90 w/IQ4

It maintains my 244Ah battery bank and 1500 watt sine wave inverter in the event of a power outage. Doesn't boil off the batteries, and the IQ4 is a must. Manual says it requires a 30 amp breaker. I've been able to run on a 20A circuit with nothing else on it no problem. It does not stay at full 90A for long once the voltage recovers. It is fused for 80 amps reverse polarity. In testing this unit can easily push 105A for a short time which is extremely impressive. As others have stated I would prefer putting 0 AWG cable in instead of 4 AWG. No complaints other than that. Between the battery bank charging I can use it as a regular PSU for my electronics bench. Well worth the purchase!

H
HwSystems
Excellent power supply

I use this power supply to charge/maintain a 200Ah AGM battery and to power a 1000W Pure-Sine Inverter in parallel. It works 24h/24h, it does not create alot of heat and is silent. Very good product. The only thing I dislike is that the hole for the wire is for 4AWG and for me that's not enough. It would be nice to be able to insert a 0AWG so the voltage drop will be lower. Also, you can ajust the voltage according to your need using the BLUE potentiometer. Search "3296 Potentiometer" to see the picture of the right one. It is located behind the two fan.

D
Dave
DSL=90

Iota are by far the best charger I have found to run off a gen-set. I use 6 L-16 batteries and charge time is 1.5 Hr. That saves a lot of fuel compared to other chargers.

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous Anonymous
Great

Only maintainer I've ever had that would not allow my tech2 to blank out when I hit the starter big plus

B
BikeGuy
Great little power supply

I got the Iota 90 amp charger mainly to power my iCharger 406Duo. If needed I can also charge lead acid batteries I use for Electrathon radioing. But the main purpose is I have around 40 4s LiPO packs I use between the four FPV mini quads I have. Being able to charge near or at 40 amps per channel with 20 batteries on each of the two channels is super helpful. The Iota can dish out whatever the iCharger needs to charge packs up like a champ.
Thanks for the help and keep up the awesome work!

G
G
DLS-90 w/IQ4

It maintains my 244Ah battery bank and 1500 watt sine wave inverter in the event of a power outage. Doesn't boil off the batteries, and the IQ4 is a must. Manual says it requires a 30 amp breaker. I've been able to run on a 20A circuit with nothing else on it no problem. It does not stay at full 90A for long once the voltage recovers. It is fused for 80 amps reverse polarity. In testing this unit can easily push 105A for a short time which is extremely impressive. As others have stated I would prefer putting 0 AWG cable in instead of 4 AWG. No complaints other than that. Between the battery bank charging I can use it as a regular PSU for my electronics bench. Well worth the purchase!

H
HwSystems
Excellent power supply

I use this power supply to charge/maintain a 200Ah AGM battery and to power a 1000W Pure-Sine Inverter in parallel. It works 24h/24h, it does not create alot of heat and is silent. Very good product. The only thing I dislike is that the hole for the wire is for 4AWG and for me that's not enough. It would be nice to be able to insert a 0AWG so the voltage drop will be lower. Also, you can ajust the voltage according to your need using the BLUE potentiometer. Search "3296 Potentiometer" to see the picture of the right one. It is located behind the two fan.

D
Dave
DSL=90

Iota are by far the best charger I have found to run off a gen-set. I use 6 L-16 batteries and charge time is 1.5 Hr. That saves a lot of fuel compared to other chargers.

Einkaufswagen

×