TBS Unify Pro32 DP 5.8GHz Video Transmitter

HIGHLIGHTS

• World’s lightest 3 Watt video transmitter
• Frequency range: 4990 MHz - 6030 MHz
• OSD configuration using TBS Smart Audio 2.1
  (via Betaflight, TBS Crossfire / Tracer or Ardupilot)
• One button frequency and power setup
• LUA support for CRSF users
• MMCX connector
• 2-6S input
• Double noise filtering (>63dB SNR)
• Optimized heat dissipation, no heatsink required
• Optional matching circular polarized antenna available

INCLUDED

• 1x TBS UNIFY PRO32 DP 5G8 HV Video transmitter
• 1x Silicone cable (ends pre-tinned)
• 1x MMCX to SMA pigtail
• 1x Heat transfer tape for easy FPV drone mounting

IMPORTANT!

The Unify Pro32 DP is a high power video transmitter. Operating it with bad quality antennas, or without antennas on higher power levels will inevitably brick the unit - faster than you would expect. It is therefore important to use the wideband function only with wideband antennas on the highest power settings!

NOTE: An antenna must be installed properly before power is applied to the transmitter. Powering on without a correctly installed antenna may easily burn the transmitter. Power spikes from other components such as ESC's can also damage the transmitter if powered directly from battery voltage. Such damage will not be covered under warranty.

Video Transmission Legality: The use and operation of this product in the USA and many other countries may require a license. Some countries may not allow its use at all. In the USA you must have a HAM radio license to use this transmitter above the 25mW power level. It is the responsibility of the end user to comply with all applicable laws and regulations of their government.